Engine Oil
1518B5
In Stock
Castrol GTX is one of the world's most trusted motor oils.
It's more than just oil. It's liquid engineering that protects against problems, like sludge, that your
engine faces every day.
Severe driving conditions such as every day stop-and-go/stop-start traffic, harsh weather conditions
and extended drain intervals, can all cause the build-up of a thick, tar-like substance called sludge. You can't see this sludge build-up but it can damage your engine's performance and cause premature engine failure.
Protect your car from harmful sludge build-up with Castrol GTX.
Application
GTX 15W-40 A3/B3 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA A3/B4, API SP or earlier specification 15W-40 lubricant.
GTX 15W-40 A3/B3 is also approved for use in VW group vehicles that require a VW 501 01/ 505 00 lubricant and meets FIAT 9.55535-D2. It is suitable for use in Mercedes-Benz vehicles requiring MB 229.1.
Advantages
Castrol GTX 15W-40 A3/B3
- Contains anti-sludge formula that provide better sludge protection compared to tough industry standards*
- Superior protection against viscosity and thermal breakdown
- Anti-wear additives that extend the life of your engine
*API SP
ACEA A3/B4
API SP
Meets - Fiat 9.55535-D2
VW 501.01/ 505 00
Suitable for use in vehicles requiring MB 229.1
It's more than just oil. It's liquid engineering that protects against problems, like sludge, that your
engine faces every day.
Severe driving conditions such as every day stop-and-go/stop-start traffic, harsh weather conditions
and extended drain intervals, can all cause the build-up of a thick, tar-like substance called sludge. You can't see this sludge build-up but it can damage your engine's performance and cause premature engine failure.
Protect your car from harmful sludge build-up with Castrol GTX.
Application
GTX 15W-40 A3/B3 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA A3/B4, API SP or earlier specification 15W-40 lubricant.
GTX 15W-40 A3/B3 is also approved for use in VW group vehicles that require a VW 501 01/ 505 00 lubricant and meets FIAT 9.55535-D2. It is suitable for use in Mercedes-Benz vehicles requiring MB 229.1.
Advantages
Castrol GTX 15W-40 A3/B3
- Contains anti-sludge formula that provide better sludge protection compared to tough industry standards*
- Superior protection against viscosity and thermal breakdown
- Anti-wear additives that extend the life of your engine
*API SP
ACEA A3/B4
API SP
Meets - Fiat 9.55535-D2
VW 501.01/ 505 00
Suitable for use in vehicles requiring MB 229.1
This Engine Oil fits the following vehicles
- Juke 1.6 DIG-T F15 (2010-2014) 10/10-12/14
- Juke 1.6 F15 (2010-2014) 10/10-12/14
Model | Juke 1.6 DIG-T F15 (2010-2014) |
---|---|
Description | Castrol GTX 15W-40 A3/B3 |
Engine Code | MR16DDT, HR16DE |
BHP | 187, 115 |
Fitment Detail | Engine |
Use Conditions | Normal/Severe |
Unit Size | 1L |
RANKING | 144 |
Capacity | 4.5 liter, 4.3 liter |
€0.00
Inc VAT
new
Select Brand
€0.00
Engine Oil
1535F3
In Stock
Castrol EDGE 5W-40, boosted with TITANIUM FST™ gives you the confidence to demand maximum engine performance from today’s latest technology, highly engineered engines that operate with tighter tolerances, requiring a high level of protection and low viscosity oils.
Castrol EDGE 5W-40 is suitable for use in automobile, gasoline and diesel engines where the manufacturer
recommends an ACEA C3, API SN or earlier specification.
Castrol EDGE 5W-40 is approved for use in vehicles from leading manufacturers, please refer to the specifications
section and your owners handbook.
*GM dexos2®: supersedes GM-LL-B-025 and GM-LL-A-025 : GB2D0715082
Product Performance Claims
ACEA C3
API SN/CF
BMW Longlife-04
dexos2®*
Meets Fiat 9.55535-S2
Meets Ford WSS-M2C917-A
MB-Approval 226.5/ 229.31/ 229.51
Renault RN 0700 / RN 0710
VW 502 00 / 505 00/ 505.01
Castrol EDGE 5W-40 is suitable for use in automobile, gasoline and diesel engines where the manufacturer
recommends an ACEA C3, API SN or earlier specification.
Castrol EDGE 5W-40 is approved for use in vehicles from leading manufacturers, please refer to the specifications
section and your owners handbook.
*GM dexos2®: supersedes GM-LL-B-025 and GM-LL-A-025 : GB2D0715082
Product Performance Claims
ACEA C3
API SN/CF
BMW Longlife-04
dexos2®*
Meets Fiat 9.55535-S2
Meets Ford WSS-M2C917-A
MB-Approval 226.5/ 229.31/ 229.51
Renault RN 0700 / RN 0710
VW 502 00 / 505 00/ 505.01
This Engine Oil fits the following vehicles
- Juke 1.6 DIG-T F15 (2010-2014) 10/10-12/14
- Juke 1.6 F15 (2010-2014) 10/10-12/14
Model | Juke 1.6 DIG-T F15 (2010-2014) |
---|---|
Description | Castrol EDGE 5W-40 |
Engine Code | MR16DDT, HR16DE |
BHP | 187, 115 |
Fitment Detail | Engine |
Use Conditions | Normal/Severe |
Unit Size | 4L |
RANKING | 069 |
Capacity | 4.5 liter, 4.3 liter |
€63.89
Inc VAT
new
Select Brand
€63.89
Engine Oil
1535FA
In Stock
- API SN/CF
- ACEA C3
- MB 229.31/ 229.51/ 226.5
- VW 505 00/ 505 01
- dexos2â„¢*
- Ford WSS-M2C917-A
- RN0700 / RN0710
- FIAT 9.55535-S2
* GM dexos2â„¢ supersedes GM-LL-A-025/ GM-LL-B-025 : GB2D0114082
- ACEA C3
- MB 229.31/ 229.51/ 226.5
- VW 505 00/ 505 01
- dexos2â„¢*
- Ford WSS-M2C917-A
- RN0700 / RN0710
- FIAT 9.55535-S2
* GM dexos2â„¢ supersedes GM-LL-A-025/ GM-LL-B-025 : GB2D0114082
This Engine Oil fits the following vehicles
- Juke 1.6 DIG-T F15 (2010-2014) 10/10-12/14
- Juke 1.6 F15 (2010-2014) 10/10-12/14
Model | Juke 1.6 DIG-T F15 (2010-2014) |
---|---|
Description | Castrol EDGE 5W-40 |
Engine Code | MR16DDT, HR16DE |
BHP | 187, 115 |
Fitment Detail | Engine |
Use Conditions | Normal/Severe |
Unit Size | 1L |
RANKING | 069 |
Capacity | 4.5 liter, 4.3 liter |
€0.00
Inc VAT
new
Select Brand
€0.00
Engine Oil
1535FD
In Stock
Castrol EDGE 5W-40, boosted with TITANIUM FST™ gives you the confidence to demand maximum engine performance from today’s latest technology, highly engineered engines that operate with tighter tolerances, requiring a high level of protection and low viscosity oils.
Castrol EDGE 5W-40 is suitable for use in automobile, gasoline and diesel engines where the manufacturer
recommends an ACEA C3, API SN or earlier specification.
Castrol EDGE 5W-40 is approved for use in vehicles from leading manufacturers, please refer to the specifications
section and your owners handbook.
*GM dexos2®: supersedes GM-LL-B-025 and GM-LL-A-025 : GB2D0715082
Product Performance Claims
ACEA C3
API SN/CF
BMW Longlife-04
dexos2®*
Meets Fiat 9.55535-S2
Meets Ford WSS-M2C917-A
MB-Approval 226.5/ 229.31/ 229.51
Renault RN 0700 / RN 0710
VW 502 00 / 505 00/ 505.01
Castrol EDGE 5W-40 is suitable for use in automobile, gasoline and diesel engines where the manufacturer
recommends an ACEA C3, API SN or earlier specification.
Castrol EDGE 5W-40 is approved for use in vehicles from leading manufacturers, please refer to the specifications
section and your owners handbook.
*GM dexos2®: supersedes GM-LL-B-025 and GM-LL-A-025 : GB2D0715082
Product Performance Claims
ACEA C3
API SN/CF
BMW Longlife-04
dexos2®*
Meets Fiat 9.55535-S2
Meets Ford WSS-M2C917-A
MB-Approval 226.5/ 229.31/ 229.51
Renault RN 0700 / RN 0710
VW 502 00 / 505 00/ 505.01
This Engine Oil fits the following vehicles
- Juke 1.6 DIG-T F15 (2010-2014) 10/10-12/14
- Juke 1.6 F15 (2010-2014) 10/10-12/14
Model | Juke 1.6 DIG-T F15 (2010-2014) |
---|---|
Description | Castrol EDGE 5W-40 |
Engine Code | MR16DDT, HR16DE |
BHP | 187, 115 |
Fitment Detail | Engine |
Use Conditions | Normal/Severe |
Unit Size | 20L |
RANKING | 069 |
Capacity | 4.5 liter, 4.3 liter |
€171.89
Inc VAT
new
Select Brand
€171.89
Engine Oil
15664C
In Stock
CASTROL EDGE 5W-30 LL BENEFITS
Maximises short and long term engine performance
Reduces engine deposits to help maximise engine response
Delivers unsurpassed levels of protection across a variety of driving conditions and temperatures, with excellent performance at low temperatures
Sustains maximum performance even when under pressure
Independently proven to improve engine efficiency
MEETS OR EXCEEDS INDUSTRY STANDARDS:
ACEA C3
MB-Approval 229.31/ 229.51
Porsche C30
VW 504 00/ 507.00
Maximises short and long term engine performance
Reduces engine deposits to help maximise engine response
Delivers unsurpassed levels of protection across a variety of driving conditions and temperatures, with excellent performance at low temperatures
Sustains maximum performance even when under pressure
Independently proven to improve engine efficiency
MEETS OR EXCEEDS INDUSTRY STANDARDS:
ACEA C3
MB-Approval 229.31/ 229.51
Porsche C30
VW 504 00/ 507.00
This Engine Oil fits the following vehicles
- Juke 1.6 DIG-T F15 (2010-2014) 10/10-12/14
- Juke 1.6 F15 (2010-2014) 10/10-12/14
Model | Juke 1.6 DIG-T F15 (2010-2014) |
---|---|
Description | Castrol EDGE 5W-30 LL |
Engine Code | MR16DDT, HR16DE |
BHP | 187, 115 |
Fitment Detail | Engine |
Use Conditions | Normal/Severe |
Unit Size | 20L |
RANKING | 058 |
Capacity | 4.5 liter, 4.3 liter |
€171.89
Inc VAT
new
Castrol Magnatec 5W30 C3 Stop/Start |20L|
15983C
In Stock
Castrol MAGNATEC STOP-START C3 5W-30 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA C3, API SN/CF or earlier specification 5W-30 lubricant.
Castrol MAGNATEC STOP-START C3 is approved for use in vehicles from leading manufacturers please refer to the specifcations section and your owners handbook.
GM dexos2: supersedes GM-LL-B-025 and GM-LL-A-025 : GB2E0131082
Castrol MAGNATEC STOP-START 5W-30 C3 and its intelligent molecules will protect your engine from the moment you start, every time you start, dramatically reducing* stop-start wear.
*Versus industry limit in the OM646LA engine test.
Product Performance Claims
ACEA C3
API SN/CF
BMW Longlife-04
dexos2®*
MB-Approval 229.31/ 229.51
VW 505 00 / 505 01
Castrol MAGNATEC STOP-START C3 is approved for use in vehicles from leading manufacturers please refer to the specifcations section and your owners handbook.
GM dexos2: supersedes GM-LL-B-025 and GM-LL-A-025 : GB2E0131082
Castrol MAGNATEC STOP-START 5W-30 C3 and its intelligent molecules will protect your engine from the moment you start, every time you start, dramatically reducing* stop-start wear.
*Versus industry limit in the OM646LA engine test.
Product Performance Claims
ACEA C3
API SN/CF
BMW Longlife-04
dexos2®*
MB-Approval 229.31/ 229.51
VW 505 00 / 505 01
€140.84
Inc VAT
new
Engine Oil
15BE05
In Stock
Castrol GTX 5W-30 A5/B5 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA A5/B5, API SL, ILSAC GF-4 or earlier specification 5W-30 lubricant.
ACEA A5/B5 API SL ILSAC GF-4 Meets - Ford WSS-M2C913-A/ WSS-M2C913-B/ WSS-M2C913-C/ WSS-M2C913-D
ACEA A5/B5 API SL ILSAC GF-4 Meets - Ford WSS-M2C913-A/ WSS-M2C913-B/ WSS-M2C913-C/ WSS-M2C913-D
This Engine Oil fits the following vehicles
- Juke 1.6 DIG-T F15 (2010-2014) 10/10-12/14
- Juke 1.6 F15 (2010-2014) 10/10-12/14
Model | Juke 1.6 DIG-T F15 (2010-2014) |
---|---|
Description | Castrol GTX 5W-30 A5/B5 |
Engine Code | MR16DDT, HR16DE |
BHP | 187, 115 |
Fitment Detail | Engine |
Use Conditions | Normal/Severe |
Unit Size | 20L |
RANKING | 121 |
Capacity | 4.5 liter, 4.3 liter |
€116.24
Inc VAT
new
ExoPro 5W-30 XTR Fully Synthetic |20L|
U260D20L
Out of Stock
A high performance low SAPS engine oil suitable for use in a wide variety of modern petrol and diesel engines.
- A highly versatile low SAPS engine oil for ACEA C3 applications
- Suitable for VW, Audi, GM, BMW, Mercedes, Seat, Skoda, and certain Peugeot & Citroen models
- Covers Longlife III applications
- Provides protection for diesel particulate filters and catalytic converters
Recommended for use in: ACEA C3, API SN, VW 504.00/507.00, BMW LONGLIFE-04, MB 229.51, PORSCHE C30
- A highly versatile low SAPS engine oil for ACEA C3 applications
- Suitable for VW, Audi, GM, BMW, Mercedes, Seat, Skoda, and certain Peugeot & Citroen models
- Covers Longlife III applications
- Provides protection for diesel particulate filters and catalytic converters
Recommended for use in: ACEA C3, API SN, VW 504.00/507.00, BMW LONGLIFE-04, MB 229.51, PORSCHE C30
€0.00
Inc VAT
new
Millers Oil Trident Professional C3 5W30 |20L|
5999FA
In Stock
FEATURES AND BENEFITS
Excellent low temperature flow when cold starting, helping to instantly protect vital components.
Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components.
Formulated with technology to provide engine cleanliness and durability which improves fuel economy, reduces emissions and provides extended drain capability.
Utilising mid SAPS technology protecting particulate filters and controlling soot build up.
Millers Oils stop start technology delivers instant protection under hot or cold conditions.
PRODUCT INFORMATION
A professional engine oil suitable for the latest engine technology. Designed to meet OEM specifications. Recommended for engines requiring a C3 5w30 viscosity targeting Volkswagen Audi Group, BMW and Mercedes Benz.
For full details on performance profiles and specifications please refer to the technical datasheet.
Performance Profile:
ACEA C3
API SN CF
Suitable for:
BMW Longlife 04 LL04
Chrysler MS-11106
Fiat 9.55535-S3
GM-LL-B-025 GM-LL-A-025
MB 229.51 MB 229.31
Porsche C30
VW504 00 VW507 00 VW506 00 VW506 01 VW503 00 VW503 01 VW502 00 VW505 01 VW502 00 VW505 00
Asian Manufacturers
Millers Oils underwrites this product for GM Dexos 2 applications
Excellent low temperature flow when cold starting, helping to instantly protect vital components.
Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components.
Formulated with technology to provide engine cleanliness and durability which improves fuel economy, reduces emissions and provides extended drain capability.
Utilising mid SAPS technology protecting particulate filters and controlling soot build up.
Millers Oils stop start technology delivers instant protection under hot or cold conditions.
PRODUCT INFORMATION
A professional engine oil suitable for the latest engine technology. Designed to meet OEM specifications. Recommended for engines requiring a C3 5w30 viscosity targeting Volkswagen Audi Group, BMW and Mercedes Benz.
For full details on performance profiles and specifications please refer to the technical datasheet.
Performance Profile:
ACEA C3
API SN CF
Suitable for:
BMW Longlife 04 LL04
Chrysler MS-11106
Fiat 9.55535-S3
GM-LL-B-025 GM-LL-A-025
MB 229.51 MB 229.31
Porsche C30
VW504 00 VW507 00 VW506 00 VW506 01 VW503 00 VW503 01 VW502 00 VW505 01 VW502 00 VW505 00
Asian Manufacturers
Millers Oils underwrites this product for GM Dexos 2 applications
€0.00
Inc VAT
new
Millers Oils Trident Professional C2 C3 5w30 |20L|
8123FA
In Stock
A fully synthetic mid SAPS (Sulphated Ash, Phosphorous, Sulphur) engine oil suitable for the latest petrol and diesel engine technology.
Features and Benefits
- Excellent low temperature flow when cold starting, helping to instantly protect vital components.
- Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components.
- Formulated with technology to provide engine cleanliness and durability which improves fuel economy, reduces emissions and provides extended drain capability.
- Utilising mid SAPS technology protecting particulate filters and controlling soot build up.
- Millers Oils stop start technology delivers instant protection under hot or cold conditions.
Product Information
A professional engine oil suitable for the latest engine technology. Designed to meet OEM specifications. Recommended for engines requiring a C2 or C3 5w30 viscosity meeting the below manufacturer specifications.
Features and Benefits
- Excellent low temperature flow when cold starting, helping to instantly protect vital components.
- Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components.
- Formulated with technology to provide engine cleanliness and durability which improves fuel economy, reduces emissions and provides extended drain capability.
- Utilising mid SAPS technology protecting particulate filters and controlling soot build up.
- Millers Oils stop start technology delivers instant protection under hot or cold conditions.
Product Information
A professional engine oil suitable for the latest engine technology. Designed to meet OEM specifications. Recommended for engines requiring a C2 or C3 5w30 viscosity meeting the below manufacturer specifications.
€0.00
Inc VAT
new
Wolf Essential SN C2/C3 5W30 |20L|
1042528
In Stock
This full synthetic engine oil is designed to meet the core requirements of ACEA and API for passenger cars. It offers complete protection of both the aftertreatment system and the engine, regardless the driving conditions. This product may not be available in your region. Please, consult your local sales contact for more information.
APPLICATIONS
Formulated to meet recent OEM specifications. It can be used to service a wide range of EURO 4 and EURO 5-engines of different manufacturers, with or without diesel particulate filter.
FEATURES
Broad coverage:: reduced lubricant costs. Significant friction reduction:: improved fuel efficiency and lowered emissions.
SPECIFICATIONS
API SN/CF
MB 229.31
ACEA C3
ACEA C2
APPLICATIONS
Formulated to meet recent OEM specifications. It can be used to service a wide range of EURO 4 and EURO 5-engines of different manufacturers, with or without diesel particulate filter.
FEATURES
Broad coverage:: reduced lubricant costs. Significant friction reduction:: improved fuel efficiency and lowered emissions.
SPECIFICATIONS
API SN/CF
MB 229.31
ACEA C3
ACEA C2
€0.00
Inc VAT
new
Mannol SAE 5W-30 VW504/507 |20L|
MN7715-20
Out of Stock
Universal bi-synthetic (PAO + esters) engine oil for modern gasoline and diesel engines of VW Group cars, including those with direct injection, with and without a turbocharger, and vehicles equipped with unit injectors (Pumpe-Duse).
Product properties:
- Ester components guarantee excellent anti-seize, anti-wear and anti-friction properties, ensuring long and stable operation of the unit injection system;
- Excellent washing and dispersing properties and the highest thermal-oxidative stability effectively prevent all types of deposits and keep engine parts clean throughout the entire oil change interval;
- Effectively saves fuel;
- The ester components, in combination with a bi-synthetic base, ensure an easy cold start due to exceptional pumpability, which significantly reduces engine startup wear;
- Maintains optimal viscosity in a wide temperature range, ensuring stable operation in all operating modes, including overloads;
- Effectively resists ageing due to the high thermal oxidative stability;
- Compatible with all exhaust gas aftertreatment systems, including DPF, TWC, EGR and SCR due to the Mid SAPS technology;
- Suits conventional engines and engines with extended oil change intervals (Long Life up to 30ꯠ km);
- Suitable for engines running on liquefied natural (LNG) and petroleum (LPG) gas.
Designed for gasoline and diesel engines of cars, light SUVs, vans and light trucks of VW Group that meet EURO IV and EURO V standards and demand additional requirements for engine oils according to specifications 504.00 / 507.00 and earlier ones.
Product properties:
- Ester components guarantee excellent anti-seize, anti-wear and anti-friction properties, ensuring long and stable operation of the unit injection system;
- Excellent washing and dispersing properties and the highest thermal-oxidative stability effectively prevent all types of deposits and keep engine parts clean throughout the entire oil change interval;
- Effectively saves fuel;
- The ester components, in combination with a bi-synthetic base, ensure an easy cold start due to exceptional pumpability, which significantly reduces engine startup wear;
- Maintains optimal viscosity in a wide temperature range, ensuring stable operation in all operating modes, including overloads;
- Effectively resists ageing due to the high thermal oxidative stability;
- Compatible with all exhaust gas aftertreatment systems, including DPF, TWC, EGR and SCR due to the Mid SAPS technology;
- Suits conventional engines and engines with extended oil change intervals (Long Life up to 30ꯠ km);
- Suitable for engines running on liquefied natural (LNG) and petroleum (LPG) gas.
Designed for gasoline and diesel engines of cars, light SUVs, vans and light trucks of VW Group that meet EURO IV and EURO V standards and demand additional requirements for engine oils according to specifications 504.00 / 507.00 and earlier ones.
€73.74
Inc VAT
new
Select Brand
€171.89
€140.84
€116.24
€68.82
€73.49
€0.00
€0.00
€0.00
€0.00
€73.74
Engine Oil
15668E
In Stock
CASTROL EDGE 5W-30 LL BENEFITS
Maximises short and long term engine performance
Reduces engine deposits to help maximise engine response
Delivers unsurpassed levels of protection across a variety of driving conditions and temperatures, with excellent performance at low temperatures
Sustains maximum performance even when under pressure
Independently proven to improve engine efficiency
MEETS OR EXCEEDS INDUSTRY STANDARDS:
ACEA C3
MB-Approval 229.31/ 229.51
Porsche C30
VW 504 00/ 507.00
Maximises short and long term engine performance
Reduces engine deposits to help maximise engine response
Delivers unsurpassed levels of protection across a variety of driving conditions and temperatures, with excellent performance at low temperatures
Sustains maximum performance even when under pressure
Independently proven to improve engine efficiency
MEETS OR EXCEEDS INDUSTRY STANDARDS:
ACEA C3
MB-Approval 229.31/ 229.51
Porsche C30
VW 504 00/ 507.00
This Engine Oil fits the following vehicles
- Juke 1.6 DIG-T F15 (2010-2014) 10/10-12/14
- Juke 1.6 F15 (2010-2014) 10/10-12/14
Model | Juke 1.6 DIG-T F15 (2010-2014) |
---|---|
Description | Castrol EDGE 5W-30 LL |
Engine Code | MR16DDT, HR16DE |
BHP | 187, 115 |
Fitment Detail | Engine |
Use Conditions | Normal/Severe |
Unit Size | 4L |
RANKING | 058 |
Capacity | 4.5 liter, 4.3 liter |
€58.07
Inc VAT
new
Millers Oil Trident Professional C3 5w30 |5L|
5999GO
In Stock
Features and Benefits
- Excellent low temperature flow when cold starting, helping to instantly protect vital components.
- Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components.
- Formulated with technology to provide engine cleanliness and durability which improves fuel economy, reduces emissions and provides extended drain capability.
- Utilising mid SAPS technology protecting particulate filters and controlling soot build up.
- Millers Oils stop start technology delivers instant protection under hot or cold conditions.
Product Information
- A professional engine oil suitable for the latest engine technology. Designed to meet OEM specifications. Recommended for engines requiring a C3 5w30 viscosity targeting Volkswagen Audi Group, BMW and Mercedes Benz.
- For full details on performance profiles and specifications please refer to the technical datasheet.
Specifications
BMW LL04
Chrysler MS-11106
Fiat 9.55535-S3
GM-LL-B-025, GM-LL-A-025
MB229.51, MB229.31
Porsche C30
VW 504 00/507 00/506 00/506 01
VW 503 00/503 01/502 00/505 01
VW 502 00/505 00
Asian Manufacturers
Milers Oils underwrites this product for GM Dexos 2 applications
Performance Profile
ACEA C3
API SN, CF
- Excellent low temperature flow when cold starting, helping to instantly protect vital components.
- Viscosity stability at high temperatures, delivering reduced wear and tear on the engine and its components.
- Formulated with technology to provide engine cleanliness and durability which improves fuel economy, reduces emissions and provides extended drain capability.
- Utilising mid SAPS technology protecting particulate filters and controlling soot build up.
- Millers Oils stop start technology delivers instant protection under hot or cold conditions.
Product Information
- A professional engine oil suitable for the latest engine technology. Designed to meet OEM specifications. Recommended for engines requiring a C3 5w30 viscosity targeting Volkswagen Audi Group, BMW and Mercedes Benz.
- For full details on performance profiles and specifications please refer to the technical datasheet.
Specifications
BMW LL04
Chrysler MS-11106
Fiat 9.55535-S3
GM-LL-B-025, GM-LL-A-025
MB229.51, MB229.31
Porsche C30
VW 504 00/507 00/506 00/506 01
VW 503 00/503 01/502 00/505 01
VW 502 00/505 00
Asian Manufacturers
Milers Oils underwrites this product for GM Dexos 2 applications
Performance Profile
ACEA C3
API SN, CF
€57.75
Inc VAT
new
Motul 8100 X Clean EFE 5w30 |5L|
109471
In Stock
Advanced 100% Synthetic lubricant that provides at the same time High Protection and Fuel Economy. Approved by BMW Group, GM (General Motors) Opel, and Mercedes for its Extra Fuel Economy property.
Specially designed for the latest generation cars, powered by Gasoline and Diesel engines, naturally aspirated or turbocharged, direct or indirect injection.
For vehicles that are Euro 4, 5 or 6 emission regulation compliant and require an ACEA C3 engine oil i.e. high HTHS (> 3.5 mPa.s) viscosity and "Mid SAPS" with reduced content of Sulfated Ash (= 0.8%), Phosphorus (0.07 = x = 0.09%) and Sulfur (= 0.3%), or an ACEA C2 engine oil i.e. a low friction, low HTHS (= 2.9 mPa.s) viscosity and "Mid SAPS" oil with reduced content of Sulfated Ash (= 0.8%), Phosphorus (= 0.09%) and Sulfur (= 0.3%).
Suitable when a "Fuel Economy" lubricant is required: ACEA C2 standard.
Compatible with catalytic converters (CAT) and Diesel Particulate Filters (DPF).
May be unsuitable for use in some engines. Always refer to the owners manual if in doubt.
OEM Approvals
BMW LL-04, GENERAL MOTORS GM dexos2â„¢, MERCEDES-BENZ MB-Approval 229.52, OPEL VAUXHALL OV0401547, VW 505 00 505 01
OEM Performances
FIAT 9.55535-S1, FIAT 9.55535-S3
OEM Recommendations
HONDA, HYUNDAI, KIA, MITSUBISHI, NISSAN, SUBARU, SUZUKI, SSANGYONG, TOYOTA
Specially designed for the latest generation cars, powered by Gasoline and Diesel engines, naturally aspirated or turbocharged, direct or indirect injection.
For vehicles that are Euro 4, 5 or 6 emission regulation compliant and require an ACEA C3 engine oil i.e. high HTHS (> 3.5 mPa.s) viscosity and "Mid SAPS" with reduced content of Sulfated Ash (= 0.8%), Phosphorus (0.07 = x = 0.09%) and Sulfur (= 0.3%), or an ACEA C2 engine oil i.e. a low friction, low HTHS (= 2.9 mPa.s) viscosity and "Mid SAPS" oil with reduced content of Sulfated Ash (= 0.8%), Phosphorus (= 0.09%) and Sulfur (= 0.3%).
Suitable when a "Fuel Economy" lubricant is required: ACEA C2 standard.
Compatible with catalytic converters (CAT) and Diesel Particulate Filters (DPF).
May be unsuitable for use in some engines. Always refer to the owners manual if in doubt.
OEM Approvals
BMW LL-04, GENERAL MOTORS GM dexos2â„¢, MERCEDES-BENZ MB-Approval 229.52, OPEL VAUXHALL OV0401547, VW 505 00 505 01
OEM Performances
FIAT 9.55535-S1, FIAT 9.55535-S3
OEM Recommendations
HONDA, HYUNDAI, KIA, MITSUBISHI, NISSAN, SUBARU, SUZUKI, SSANGYONG, TOYOTA
€0.00
Inc VAT
new
Engine Oil
15669E
In Stock
Modern engines are smaller and more efficient without compromising on performance. The intense pressure in the current generation of engines creates friction that can reduce engine performance by up to 10%. For today's motorist, loss of engine performance is simply not an option. Castrol EDGE with Fluid TITANIUM is our most advanced motor oil. The product transforms to become stronger under pressure and reduces performance-reducing friction to unleash the true engine performance of your engine.
Castrol EDGE 5W-30 LL with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high degree of protection and better performance oils.
- Stronger under pressure, so your car's engine is always protected
- Reduces friction at all engine speeds and conditions that can reduce power
- Independently tested against the highest standards for proven performance
- Recommended by the world's leading car manufacturers
- Protects the engine throughout the oil change interval, even under extreme pressure
- Suitable for use in hybrid vehicles
Specifications:
- ACEA C3
- MB-Approval 229.31 / 229.51
- Porsche C30
- VW 504 00 / 507.00
Castrol EDGE 5W-30 LL with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high degree of protection and better performance oils.
- Stronger under pressure, so your car's engine is always protected
- Reduces friction at all engine speeds and conditions that can reduce power
- Independently tested against the highest standards for proven performance
- Recommended by the world's leading car manufacturers
- Protects the engine throughout the oil change interval, even under extreme pressure
- Suitable for use in hybrid vehicles
Specifications:
- ACEA C3
- MB-Approval 229.31 / 229.51
- Porsche C30
- VW 504 00 / 507.00
This Engine Oil fits the following vehicles
- Juke 1.6 DIG-T F15 (2010-2014) 10/10-12/14
- Juke 1.6 F15 (2010-2014) 10/10-12/14
Model | Juke 1.6 DIG-T F15 (2010-2014) |
---|---|
Description | Castrol EDGE 5W-30 LL |
Engine Code | MR16DDT, HR16DE |
BHP | 187, 115 |
Fitment Detail | Engine |
Use Conditions | Normal/Severe |
Unit Size | 5L |
RANKING | 058 |
Capacity | 4.5 liter, 4.3 liter |
€0.00
Inc VAT
new
EXOPRO Fully Synthetic Low SAPS 5W30 |5L|
U225S5L
In Stock
5W-30 XTR is a new generation fully synthetic low SAPS (sulphated ash, phosphorus and sulphur) multigrade engine oil formulated using the latest developments in synthetic technology together with state of the art additive chemistry which sets new standards in engine oil performance.5W-30 XTR has been developed to provide outstanding performance, e.g. in terms of engine cleanliness and fuel economy benefits, along with effective emission control and full compatibility with emission control after-treatment systems such as diesel particulate filters. Low SAPS additive technology ensures a high level of continuous pollution control thereby minimising environmental damage.
Benefits:
• A highly versatile low SAPS engine oil for ACEA C3 applications.
• Suitable for VW, Audi, BMW, Mercedes, Seat, Skoda, and many other models
• Covers Longlife III applications
• Provides protection for diesel particulate filters and catalytic converters
Applications:
5W-30 XTR is suitable for both petrol and diesel engines, including turbocharged, and is formulated to meet the
performance demands and requirements of the most up to date VW/Audi specifications VW 504.00 and VW 507.00
which encompass high standards of emission control and ultimate engine protection. In addition, 5W-30 XTR is
suitable for use in a wide range of passenger cars and light commercial vehicles (including current GM & Toyota
models) where the following specifications are required.
Recommended for use in: ACEA C3, API SN, VW 504.00/507.00, BMW LONGLIFE-04, MB 229.51, PORSCHE C30
Benefits:
• A highly versatile low SAPS engine oil for ACEA C3 applications.
• Suitable for VW, Audi, BMW, Mercedes, Seat, Skoda, and many other models
• Covers Longlife III applications
• Provides protection for diesel particulate filters and catalytic converters
Applications:
5W-30 XTR is suitable for both petrol and diesel engines, including turbocharged, and is formulated to meet the
performance demands and requirements of the most up to date VW/Audi specifications VW 504.00 and VW 507.00
which encompass high standards of emission control and ultimate engine protection. In addition, 5W-30 XTR is
suitable for use in a wide range of passenger cars and light commercial vehicles (including current GM & Toyota
models) where the following specifications are required.
Recommended for use in: ACEA C3, API SN, VW 504.00/507.00, BMW LONGLIFE-04, MB 229.51, PORSCHE C30
€0.00
Inc VAT
new
Wolf OE LEVELTECH 5W30 LL III |5L|
1043893
In Stock
This full synthetic engine oil is formulated to meet the specifications of different OEMs. It reaches ACEA and API requirements by balancing excellent fluidity with advanced engine protecting, regardless the driving conditions.
Applications
Its formulation is designed to meet the VW 504.00 and 507.00 specifications. This engine oil can be used to service a range of different EURO 4 and EURO 5-engines equipped with diesel particulate filters.
FEATURES
Aftertreatment protection : full aftertreatment device protection.
Total engine protection : outstanding engine cleanliness and durability.
Performance
The engine will stay wear and deposit free thanks to the oil's improved piston cleanliness and anti-oxidation properties, improving the lifespan of the engine.
Specification level
ACEA: C2
ACEA: C3
API: Approval SN
BMW: LONGLIFE-04
MB: 229.51
PORSCHE: C30
VW: 504.00/507.00
Applications
Its formulation is designed to meet the VW 504.00 and 507.00 specifications. This engine oil can be used to service a range of different EURO 4 and EURO 5-engines equipped with diesel particulate filters.
FEATURES
Aftertreatment protection : full aftertreatment device protection.
Total engine protection : outstanding engine cleanliness and durability.
Performance
The engine will stay wear and deposit free thanks to the oil's improved piston cleanliness and anti-oxidation properties, improving the lifespan of the engine.
Specification level
ACEA: C2
ACEA: C3
API: Approval SN
BMW: LONGLIFE-04
MB: 229.51
PORSCHE: C30
VW: 504.00/507.00
€0.00
Inc VAT
new
TOROTEC Synthetic 5W-30 Longlife VW504/507 |5L|
PCM013-S50
In Stock
AZTEC OILS SYNTHETIC 5W-30 LONGLIFE VW504/507 5L (PCM013)
A new generation fully synthetic, multi-grade engine oil formulated for use with modern petrol and diesel engines. Careful selection of high quality base oils and the use of advanced additive technology ensures optimum performance of engine components, including diesel particulate filters (DPF), where present, over extended drain intervals. Engineered to provide long term protection for emission control systems. Protecting these systems helps to maintain optimal emissions cleanliness throughout the life cycle of an engine, increasing environmental friendliness.
Benefits:
- Ensures lubricant performance over extended drain intervals.
- Maintains very high standards of engine cleanliness.
- Exceptional long-term anti-wear and oxidation stability.
- Superior performance under both high temperature and low temperature conditions.
- Excellent start up protection.
- Improved fuel efficiency.
- Effective environmental protection.
Applications:
Suitable for use in most petrol and diesel engines meeting the Euro IV emission standard with or without diesel particulate filters.
Particularly recommended for Volkswagen and Audi engines with variable service intervals (WIV), and for other compatible vehicles that require a fuel-efficient lubricant.
Typical Test Data:
- Density @ 15°C - 0.850
- Flash Point (°C) - 200
- Kinematic Viscosity cSt @ 100°C - 12.1
- Kinematic Viscosity cSt @ 40°C - 74
- Pour Point (°C) - -45
- Total Base Number (mg KOH/g) - 8
- Viscosity Index 161
Product Profile:
- ACEA C3
- API SN/CF
- BMW LL-04
- MB 229.51
- Porsche C30
- VW
A new generation fully synthetic, multi-grade engine oil formulated for use with modern petrol and diesel engines. Careful selection of high quality base oils and the use of advanced additive technology ensures optimum performance of engine components, including diesel particulate filters (DPF), where present, over extended drain intervals. Engineered to provide long term protection for emission control systems. Protecting these systems helps to maintain optimal emissions cleanliness throughout the life cycle of an engine, increasing environmental friendliness.
Benefits:
- Ensures lubricant performance over extended drain intervals.
- Maintains very high standards of engine cleanliness.
- Exceptional long-term anti-wear and oxidation stability.
- Superior performance under both high temperature and low temperature conditions.
- Excellent start up protection.
- Improved fuel efficiency.
- Effective environmental protection.
Applications:
Suitable for use in most petrol and diesel engines meeting the Euro IV emission standard with or without diesel particulate filters.
Particularly recommended for Volkswagen and Audi engines with variable service intervals (WIV), and for other compatible vehicles that require a fuel-efficient lubricant.
Typical Test Data:
- Density @ 15°C - 0.850
- Flash Point (°C) - 200
- Kinematic Viscosity cSt @ 100°C - 12.1
- Kinematic Viscosity cSt @ 40°C - 74
- Pour Point (°C) - -45
- Total Base Number (mg KOH/g) - 8
- Viscosity Index 161
Product Profile:
- ACEA C3
- API SN/CF
- BMW LL-04
- MB 229.51
- Porsche C30
- VW
€0.00
Inc VAT
new
Mannol SAE 5W-30 |5L|
MN7715-5ME
Out of Stock
Product properties:
- Ester components guarantee excellent anti-seize, anti-wear and anti-friction properties, ensuring long and stable operation of the unit injection system;
- Excellent washing and dispersing properties and the highest thermal-oxidative stability effectively prevent all types of deposits and keep engine parts clean throughout the entire oil change interval;
- Effectively saves fuel;
- The ester components, in combination with a bi-synthetic base, ensure an easy cold start due to exceptional pumpability, which significantly reduces engine startup wear;
- Maintains optimal viscosity in a wide temperature range, ensuring stable operation in all operating modes, including overloads;
- Effectively resists ageing due to the high thermal oxidative stability;
- Compatible with all exhaust gas aftertreatment systems, including DPF, TWC, EGR and SCR due to the Mid SAPS technology;
- Suits conventional engines and engines with extended oil change intervals (Long Life up to 30ꯠ km);
- Suitable for engines running on liquefied natural (LNG) and petroleum (LPG) gas.
Designed for gasoline and diesel engines of cars, light SUVs, vans and light trucks of VW Group that meet EURO IV and EURO V standards and demand additional requirements for engine oils according to specifications 504.00 / 507.00 and earlier ones.
- Ester components guarantee excellent anti-seize, anti-wear and anti-friction properties, ensuring long and stable operation of the unit injection system;
- Excellent washing and dispersing properties and the highest thermal-oxidative stability effectively prevent all types of deposits and keep engine parts clean throughout the entire oil change interval;
- Effectively saves fuel;
- The ester components, in combination with a bi-synthetic base, ensure an easy cold start due to exceptional pumpability, which significantly reduces engine startup wear;
- Maintains optimal viscosity in a wide temperature range, ensuring stable operation in all operating modes, including overloads;
- Effectively resists ageing due to the high thermal oxidative stability;
- Compatible with all exhaust gas aftertreatment systems, including DPF, TWC, EGR and SCR due to the Mid SAPS technology;
- Suits conventional engines and engines with extended oil change intervals (Long Life up to 30ꯠ km);
- Suitable for engines running on liquefied natural (LNG) and petroleum (LPG) gas.
Designed for gasoline and diesel engines of cars, light SUVs, vans and light trucks of VW Group that meet EURO IV and EURO V standards and demand additional requirements for engine oils according to specifications 504.00 / 507.00 and earlier ones.
€0.00
Inc VAT
new
Select Brand
€58.07
€57.75
€0.00
€0.00
€0.00
€0.00
€0.00
€0.00
Engine Oil
1595DB
In Stock
Description
Advances in engine technology have led to increased power and efficiency, meaning engines work harder and under
higher pressures than ever before. The only thing keeping metal engine components apart is the oil, so it needs to be
strong and remain strong.
Castrol EDGE is our strongest and most advanced range of engine oils.
Its TITANIUM FSTâ„¢ doubles its film strength, preventing oil film breakdown and reducing friction.
Castrol EDGE with TITANIUM FSTâ„¢: helping your engine perform at its best
Application
Castrol EDGE 10W-60 is suitable for use in automobile, gasoline and diesel engines where the manufacturer
recommends an ACEA A3/B3, A3/B4, API SN/CF or earlier specification 10W-60 lubricant.
Castrol EDGE 10W-60 has BMW approval for BMW M-Models that require a 10W-60 lubricant.
Castrol EDGE 10W-60 is approved for use in vehicles that require a VW 501 01 / 505 00 specification 10W-60 lubricant
Advantages
Castrol EDGE 10W-60 boosted with TITANIUM FSTâ„¢, provides outstanding oil strength, giving you the confidence to
demand maximum engine performance from sports cars, competition and the latest technology high powered engines
which operate under higher pressures requiring an oil with unsurpassed strength and performance credentials.
Castrol EDGE 10W-60:
- Maximises short and long term engine performance
- Reduces engine deposits to help maximise engine response
- Delivers unsurpassed levels of protection across a variety of driving conditions and temperatures
- Delivers and sustains maximum horsepower for longer, even when under pressure
ACEA A3/B3, A3/B4
API SN/CF
Approved for BMW M-Models
Koenigsegg Approved
VW 501 01/ 505 00
Approved for BMW M Models
Approved for use in Koenigsegg engines
Also suitable for use in Aston Martin Vantage V8 S, Audi R8 V10 GT
Bugatti Chiron, Bugatti Veyron, Ferrari F12 Belinetta & Ferrari FF
Advances in engine technology have led to increased power and efficiency, meaning engines work harder and under
higher pressures than ever before. The only thing keeping metal engine components apart is the oil, so it needs to be
strong and remain strong.
Castrol EDGE is our strongest and most advanced range of engine oils.
Its TITANIUM FSTâ„¢ doubles its film strength, preventing oil film breakdown and reducing friction.
Castrol EDGE with TITANIUM FSTâ„¢: helping your engine perform at its best
Application
Castrol EDGE 10W-60 is suitable for use in automobile, gasoline and diesel engines where the manufacturer
recommends an ACEA A3/B3, A3/B4, API SN/CF or earlier specification 10W-60 lubricant.
Castrol EDGE 10W-60 has BMW approval for BMW M-Models that require a 10W-60 lubricant.
Castrol EDGE 10W-60 is approved for use in vehicles that require a VW 501 01 / 505 00 specification 10W-60 lubricant
Advantages
Castrol EDGE 10W-60 boosted with TITANIUM FSTâ„¢, provides outstanding oil strength, giving you the confidence to
demand maximum engine performance from sports cars, competition and the latest technology high powered engines
which operate under higher pressures requiring an oil with unsurpassed strength and performance credentials.
Castrol EDGE 10W-60:
- Maximises short and long term engine performance
- Reduces engine deposits to help maximise engine response
- Delivers unsurpassed levels of protection across a variety of driving conditions and temperatures
- Delivers and sustains maximum horsepower for longer, even when under pressure
ACEA A3/B3, A3/B4
API SN/CF
Approved for BMW M-Models
Koenigsegg Approved
VW 501 01/ 505 00
Approved for BMW M Models
Approved for use in Koenigsegg engines
Also suitable for use in Aston Martin Vantage V8 S, Audi R8 V10 GT
Bugatti Chiron, Bugatti Veyron, Ferrari F12 Belinetta & Ferrari FF
This Engine Oil fits the following vehicles
- Juke 1.6 DIG-T F15 (2010-2014) 10/10-12/14
- Juke 1.6 F15 (2010-2014) 10/10-12/14
Model | Juke 1.6 DIG-T F15 (2010-2014) |
---|---|
Description | Castrol EDGE 10W-60 |
Engine Code | MR16DDT, HR16DE |
BHP | 187, 115 |
Fitment Detail | Engine |
Use Conditions | Normal/Severe |
Unit Size | 20L |
RANKING | 073 |
Capacity | 4.5 liter, 4.3 liter |
€0.00
Inc VAT
new
Select Brand
€0.00
Engine Oil
1599EA
In Stock
Traffic congestion has increased significantly over the past decade. That’s annoying, but worse, it slowly damages your engine – permanently. To respond to increasingly urbanised environments, we developed Castrol MAGNATEC with patented DUALOCK technology.
Mechanics choose Castrol MAGNATEC with DUALOCK Technology to protect engines all around the world from warm-up wear* and re-start wear**. Castrol MAGNATEC clings like a magnet to the vulnerable metal surfaces in your engine during warm-up. The unique patented molecule in DUALOCK Technology then locks together with the other MAGNATEC molecule, forming a forcefield that provides 50% better protection from warm-up wear and re-start wear.
Description
Up to 75% of engine wear happens while your engine warms up. When the engine stops, oil drains off critical engine
parts, however Castrol MAGNATEC’s Intelligent Molecules don’t. They cling to the engine like a magnet, providing an
extra layer of protection.
Castrol MAGNATEC’s formulation protects from the moment you start, dramatically reducing engine wear*.
Castrol MAGNATEC. Instant Protection From The Moment You Start.
*As tested in the industry Sequence IVA wear test.
Application
Castrol MAGNATEC 5W-30 C2 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer
recommends an ACEA C2 5W-30 lubricant.
Castrol MAGNATEC 5W-30 C2 is approved for use in Peugeot Citroen vehicles that require a PSA Approval B71 2290
5W-30 lubricant.
Advantages
Castrol MAGNATEC’s Intelligent Molecules:
Cling to engine parts when the oil drains down
Adsorbs to metal surfaces to make engine parts more resistant to wear
Are combined with synthetic technology to provide increased protection in high and low temperature applications
Provide continuous protection for different driving conditions, styles and temperatures
- ACEA C2
- PSA Approval B71 2290
Mechanics choose Castrol MAGNATEC with DUALOCK Technology to protect engines all around the world from warm-up wear* and re-start wear**. Castrol MAGNATEC clings like a magnet to the vulnerable metal surfaces in your engine during warm-up. The unique patented molecule in DUALOCK Technology then locks together with the other MAGNATEC molecule, forming a forcefield that provides 50% better protection from warm-up wear and re-start wear.
Description
Up to 75% of engine wear happens while your engine warms up. When the engine stops, oil drains off critical engine
parts, however Castrol MAGNATEC’s Intelligent Molecules don’t. They cling to the engine like a magnet, providing an
extra layer of protection.
Castrol MAGNATEC’s formulation protects from the moment you start, dramatically reducing engine wear*.
Castrol MAGNATEC. Instant Protection From The Moment You Start.
*As tested in the industry Sequence IVA wear test.
Application
Castrol MAGNATEC 5W-30 C2 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer
recommends an ACEA C2 5W-30 lubricant.
Castrol MAGNATEC 5W-30 C2 is approved for use in Peugeot Citroen vehicles that require a PSA Approval B71 2290
5W-30 lubricant.
Advantages
Castrol MAGNATEC’s Intelligent Molecules:
Cling to engine parts when the oil drains down
Adsorbs to metal surfaces to make engine parts more resistant to wear
Are combined with synthetic technology to provide increased protection in high and low temperature applications
Provide continuous protection for different driving conditions, styles and temperatures
- ACEA C2
- PSA Approval B71 2290
This Engine Oil fits the following vehicles
- Juke 1.6 DIG-T F15 (2010-2014) 10/10-12/14
- Juke 1.6 F15 (2010-2014) 10/10-12/14
Model | Juke 1.6 DIG-T F15 (2010-2014) |
---|---|
Description | Castrol Magnatec Stop-Start 5W-30 C2 |
Engine Code | MR16DDT, HR16DE |
BHP | 187, 115 |
Fitment Detail | Engine |
Use Conditions | Normal/Severe |
Unit Size | 4L |
RANKING | 092 |
Capacity | 4.5 liter, 4.3 liter |
€52.13
Inc VAT
new
Select Brand
€52.13
Engine Oil
15A0B2
In Stock
CASTROL EDGE 10W-60 – BENEFITS:
Maximises short and long term engine performance
Delivers outstanding levels of protection across a variety of driving conditions and temperatures
Reduces engine deposits to help maximise engine response*
Proven and tested in world leading supercars
* Compared to the limit in the ASTM D 6593 Seq VG testMEETS OR EXCEEDS INDUSTRY STANDARDS:
ACEA A3/B3, A3/B4
API SN/CF
VW 501 01/ 505 00TRUSTED TO PERFORM:
Approved for BMW M-Models.
Approved for use in Koenigsegg engines.
Suitable for use in Aston Martin V8 Vantage S, Audi R8 V10 GT, Bugatti Chiron, Bugatti Veyron, Ferrari F12 Berlinetta and Ferrari FF
When choosing oil, please refer to your owner’s handbook and the product specifications shown above. May also be suitable for other vehicles.
Maximises short and long term engine performance
Delivers outstanding levels of protection across a variety of driving conditions and temperatures
Reduces engine deposits to help maximise engine response*
Proven and tested in world leading supercars
* Compared to the limit in the ASTM D 6593 Seq VG testMEETS OR EXCEEDS INDUSTRY STANDARDS:
ACEA A3/B3, A3/B4
API SN/CF
VW 501 01/ 505 00TRUSTED TO PERFORM:
Approved for BMW M-Models.
Approved for use in Koenigsegg engines.
Suitable for use in Aston Martin V8 Vantage S, Audi R8 V10 GT, Bugatti Chiron, Bugatti Veyron, Ferrari F12 Berlinetta and Ferrari FF
When choosing oil, please refer to your owner’s handbook and the product specifications shown above. May also be suitable for other vehicles.
This Engine Oil fits the following vehicles
- Juke 1.6 DIG-T F15 (2010-2014) 10/10-12/14
- Juke 1.6 F15 (2010-2014) 10/10-12/14
Model | Juke 1.6 DIG-T F15 (2010-2014) |
---|---|
Description | Castrol EDGE 10W-60 |
Engine Code | MR16DDT, HR16DE |
BHP | 187, 115 |
Fitment Detail | Engine |
Use Conditions | Normal/Severe |
Unit Size | 4L |
RANKING | 073 |
Capacity | 4.5 liter, 4.3 liter |
€64.12
Inc VAT
new
Select Brand
€64.12
Engine Oil
15CA20
In Stock
Engine oil Castrol Magnatec 10W-40 A3/B4
Up to 75% of engine wear occurs during the start-up and warm-up phase. When the engine stops, oil runs off critical engine parts, but Castrol Magnatec intelligent molecules do not. These attach themselves like a magnet to the critical engine parts. This creates a protective layer, which protects from the start. Castrol Magnatec. Immediate protection from the moment you start the engine.
Castrol Magnatec 10W-40 A3/B4 is suitable for use in petrol and diesel engines where the manufacturer recommends the following specifications: API SN, ACEA A3/B4, A3/B3 or earlier specification. Castrol Magnatec 10W-40 A3/B4 is also approved for use in VW group vehicles which require specifications 501 01-505 00.
Cling to critical engine parts even when the engine is not running
Immediate protection from the moment you start the engine
They adhere to engine parts for active and lasting engine protection
The synthetic technology offers better protection at high and low temperatures
Provide continuous protection in all conditions.
Specifications:
ACEA A3/B3, A3/B4
API SN
Meets Fiat 9.55535-D2 9.55535-G2
MB-Approval 226.5
Renault RN 0700 / RN 0710
VW 501 01/ 505 00
Oil Viscosity Classification SAE 10W-40
Content 4 liter
Specification ACEA Light Duty A3 / B
API Gasoline SN
Packing Type Bottle
Manufacturer Release MB 226.5
Renault RN 0700
Renault RN 0710
VW 501 01/505 00
Fiat 9.55535-D2
Guarantee 2 years
Oil Part Synthetic Oil
Up to 75% of engine wear occurs during the start-up and warm-up phase. When the engine stops, oil runs off critical engine parts, but Castrol Magnatec intelligent molecules do not. These attach themselves like a magnet to the critical engine parts. This creates a protective layer, which protects from the start. Castrol Magnatec. Immediate protection from the moment you start the engine.
Castrol Magnatec 10W-40 A3/B4 is suitable for use in petrol and diesel engines where the manufacturer recommends the following specifications: API SN, ACEA A3/B4, A3/B3 or earlier specification. Castrol Magnatec 10W-40 A3/B4 is also approved for use in VW group vehicles which require specifications 501 01-505 00.
Cling to critical engine parts even when the engine is not running
Immediate protection from the moment you start the engine
They adhere to engine parts for active and lasting engine protection
The synthetic technology offers better protection at high and low temperatures
Provide continuous protection in all conditions.
Specifications:
ACEA A3/B3, A3/B4
API SN
Meets Fiat 9.55535-D2 9.55535-G2
MB-Approval 226.5
Renault RN 0700 / RN 0710
VW 501 01/ 505 00
Oil Viscosity Classification SAE 10W-40
Content 4 liter
Specification ACEA Light Duty A3 / B
API Gasoline SN
Packing Type Bottle
Manufacturer Release MB 226.5
Renault RN 0700
Renault RN 0710
VW 501 01/505 00
Fiat 9.55535-D2
Guarantee 2 years
Oil Part Synthetic Oil
This Engine Oil fits the following vehicles
- Juke 1.6 DIG-T F15 (2010-2014) 10/10-12/14
- Juke 1.6 F15 (2010-2014) 10/10-12/14
Model | Juke 1.6 DIG-T F15 (2010-2014) |
---|---|
Description | Castrol Magnatec 10W-40 A3/B4 |
Engine Code | MR16DDT, HR16DE |
BHP | 187, 115 |
Fitment Detail | Engine |
Use Conditions | Normal/Severe |
Unit Size | 5L |
RANKING | 105 |
Capacity | 4.5 liter, 4.3 liter |
€0.00
Inc VAT
new
Select Brand
€0.00
Engine Oil
15F097
In Stock
Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18ꯠ times 1 a year. That’s annoying, but worse, it slowly damages your engine – permanently.
Uniquely, Castrol MAGNATEC’s breakthrough DUALOCK molecules cling to critical engine parts and lock together to:
- Form a powerful force field of protection
- Dramatically reduce both warm-up 2 and stop-start 3 wear by 50%
- Deliver unique patented protection designed specifically for modern driving
Non-stop protection from every start.
1 Global average from 50 cities, Castrol MAGNATEC STOP-START Index 2014
2 Tested versus the Sequence IVA API SN wear limit.
3 Tested versus the CEC OM646LA ACEA wear limits.
Application
Castrol MAGNATEC 10W-40 A3/B4 is suitable for use in automotive gasoline and diesel engines where the
manufacturer recommends an ACEA A3/B4, A3/B3, API SN 10W-40 lubricant.
Castrol MAGNATEC 10W-40 A3/B4 is approved for use in vehicles from leading manufacturers, please refer to the
specifications section and your owners handbook.
ACEA A3/B3, A3/B4
API SN
Meets FIAT 9.55535-D2
MB-Approval 226.5
Renault RN 0700/0710
VW 501 01 / 505 00
Uniquely, Castrol MAGNATEC’s breakthrough DUALOCK molecules cling to critical engine parts and lock together to:
- Form a powerful force field of protection
- Dramatically reduce both warm-up 2 and stop-start 3 wear by 50%
- Deliver unique patented protection designed specifically for modern driving
Non-stop protection from every start.
1 Global average from 50 cities, Castrol MAGNATEC STOP-START Index 2014
2 Tested versus the Sequence IVA API SN wear limit.
3 Tested versus the CEC OM646LA ACEA wear limits.
Application
Castrol MAGNATEC 10W-40 A3/B4 is suitable for use in automotive gasoline and diesel engines where the
manufacturer recommends an ACEA A3/B4, A3/B3, API SN 10W-40 lubricant.
Castrol MAGNATEC 10W-40 A3/B4 is approved for use in vehicles from leading manufacturers, please refer to the
specifications section and your owners handbook.
ACEA A3/B3, A3/B4
API SN
Meets FIAT 9.55535-D2
MB-Approval 226.5
Renault RN 0700/0710
VW 501 01 / 505 00
This Engine Oil fits the following vehicles
- Juke 1.6 DIG-T F15 (2010-2014) 10/10-12/14
- Juke 1.6 F15 (2010-2014) 10/10-12/14
Model | Juke 1.6 DIG-T F15 (2010-2014) |
---|---|
Description | Castrol Magnatec 10W-40 A/B |
Engine Code | MR16DDT, HR16DE |
BHP | 187, 115 |
Fitment Detail | Engine |
Use Conditions | Normal/Severe |
Unit Size | 1L |
RANKING | 104 |
Capacity | 4.5 liter, 4.3 liter |
€0.00
Inc VAT
new
Select Brand
€0.00
Engine Oil
15CA1E
Out of Stock
Castrol MAGNATEC 10W-40 A3/B4 is suitable for use in Automotive gasoline and diesel engines where the manufacturer recommends an:
API SL/CF, ACEA A3/B4, A3/B3 or earlier specification 10W-40 lubricant.
Castrol MAGNATEC 10W-40 A3/B4 is also approved for use in VW group vehicles that require a VW 501 01 / 505 00 specification 10W-40 lubricant and Mercedes vehicles that require an MB-Approval 226.5/229.1 10W-40 lubricant.
Product Performance Claims:
ACEA A3/B3, A3/B4
API SN
Meets Fiat 9.55535-D2 9.55535-G2
MB-Approval 226.5
Renault RN 0700 / RN 0710
VW 501 01/ 505 00
TYPE:
Part Synthetic
API SL/CF, ACEA A3/B4, A3/B3 or earlier specification 10W-40 lubricant.
Castrol MAGNATEC 10W-40 A3/B4 is also approved for use in VW group vehicles that require a VW 501 01 / 505 00 specification 10W-40 lubricant and Mercedes vehicles that require an MB-Approval 226.5/229.1 10W-40 lubricant.
Product Performance Claims:
ACEA A3/B3, A3/B4
API SN
Meets Fiat 9.55535-D2 9.55535-G2
MB-Approval 226.5
Renault RN 0700 / RN 0710
VW 501 01/ 505 00
TYPE:
Part Synthetic
This Engine Oil fits the following vehicles
- Juke 1.6 DIG-T F15 (2010-2014) 10/10-12/14
- Juke 1.6 F15 (2010-2014) 10/10-12/14
Model | Juke 1.6 DIG-T F15 (2010-2014) |
---|---|
Description | Castrol Magnatec 10W-40 A3/B4 |
Engine Code | MR16DDT, HR16DE |
BHP | 187, 115 |
Fitment Detail | Engine |
Use Conditions | Normal/Severe |
Unit Size | 1L |
RANKING | 105 |
Capacity | 4.5 liter, 4.3 liter |
€0.00
Inc VAT
new
Select Brand
€0.00
Engine Oil
15CA3F
Out of Stock
This Engine Oil fits the following vehicles
- Juke 1.6 DIG-T F15 (2010-2014) 10/10-12/14
- Juke 1.6 F15 (2010-2014) 10/10-12/14
Model | Juke 1.6 DIG-T F15 (2010-2014) |
---|---|
Description | Castrol Magnatec Stop-Start 5W-30 A5 |
Engine Code | MR16DDT, HR16DE |
BHP | 187, 115 |
Fitment Detail | Engine |
Use Conditions | Normal/Severe |
Unit Size | 20L |
RANKING | 099 |
Capacity | 4.5 liter, 4.3 liter |
€159.41
Inc VAT
new
Select Brand
€159.41