CV Boot Kit (Front+Rear)
CV88
In Stock
The cut to size deisgn on the CV88 enables it to fit some cars, 4x4's and LCV's which in turn reduces the amount of CV boots that are needed to be stocked. As well as this the design of the boot allows for superior flexibility which minimalises wear and tear especially when the vehicle is on full lock.
The CV88 Universal CV Boot is resistant to:
Oil & grease,
Abrasion,
Grit,
Extremes of temperature,
Tear and impact damage.
CV88 Fits vehicles with large CV joints; some cars, 4x4’s and light commercial vehicles.
Shaft: ø27-37mm
Joint: ø78-130mm
Length: 81-152mm
Can be fitted to trilobal/tripod joints, follow the simple step by step instructions found printed in the box or below.
Can be fitted using the conventional cone method.
Alternatively the boot can be stretched using either of our innovative tools, Duragun® or Duralec®, which will enable the job to be fully completed in only 20 minutes, a fraction of the conventional time.
Kit Contains:
CV Boot, Grease Sachet, Small and Large Ear Clamps
The CV88 Universal CV Boot is resistant to:
Oil & grease,
Abrasion,
Grit,
Extremes of temperature,
Tear and impact damage.
CV88 Fits vehicles with large CV joints; some cars, 4x4’s and light commercial vehicles.
Shaft: ø27-37mm
Joint: ø78-130mm
Length: 81-152mm
Can be fitted to trilobal/tripod joints, follow the simple step by step instructions found printed in the box or below.
Can be fitted using the conventional cone method.
Alternatively the boot can be stretched using either of our innovative tools, Duragun® or Duralec®, which will enable the job to be fully completed in only 20 minutes, a fraction of the conventional time.
Kit Contains:
CV Boot, Grease Sachet, Small and Large Ear Clamps
This CV Boot Kit fits the following vehicles
- Insignia 2.0 CDTi 160 (2008-2014) 08/10-12/14
| Model | Insignia 2.0 CDTi 160 (2008-2014) |
|---|---|
| Description | Universal CV Boot Kit |
| Engine Code | A20DTH |
| BHP | 158 |
| Accessories | CSP50 Cone Spray; CSP150R Cone Spray Refill; GR500 500g CV Grease Tub |
| Installation Tool | Duragun; Fitting Cone (FC1); Ear Clamp Pliers (ECP1) |
| Fitment Detail | Outer |
| Size mm | Joint: 78-130, Length: 81-152, Shaft: 27-37 |
€25.12
Inc VAT
new
Select Brand
€25.12
€0.00
CV Boot Kit (Front+Rear)
DBC300
Out of Stock
This CV Boot Kit fits the following vehicles
- Insignia 2.0 CDTi 160 (2008-2014) 08/10-12/14
| Model | Insignia 2.0 CDTi 160 (2008-2014) |
|---|---|
| Description | Duraboot CV Boot Kit |
| Engine Code | A20DTH |
| BHP | 158 |
| Accessories | CSP50 Cone Spray; CSP150R Cone Spray Refill; GR500 500g CV Grease Tub |
| Installation Tool | Duragun; Fitting Cone (FC1); Ear Clamp Pliers (ECP1) |
| Fitment Detail | Outer |
| Size mm | Joint: 84-112, Length: 101-125, Shaft: 25-35 |
€9.59
Inc VAT
new
Select Brand
€9.59
CV Boot Kit (Inner, Outer)
DBC400
In Stock
This CV Boot Kit fits the following vehicles
- Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
- Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14
| Model | Insignia 2.0 CDTi 130 (2008-2014) |
|---|---|
| Description | Duraboot CV Boot Kit |
| Engine Code | A20DT, A20DTJ, A20DTH |
| BHP | 128, 158 |
| Accessories | CSP50 Cone Spray; CSP150R Cone Spray Refill; GR500 500g CV Grease Tub |
| Installation Tool | Duragun; Fitting Cone (FC1); Ear Clamp Pliers (ECP1) |
| Size mm | Joint: 78-104, Length: 95-118, Shaft: 21-30 |
€9.34
Inc VAT
new
Select Brand
€9.34
CV Boot Kit (Inner, Outer)
CV96
In Stock
The cut to size deisgn on the CV96 enables it to fit most cars which in turn reduces the amount of CV boots that are needed to be stocked. As well as this the design of the boot allows for superior flexibility which minimalises wear and tear especially when the vehicle is on full lock.
The CV96 Universal CV Boot is resistant to:
Oil & grease,
Abrasion,
Grit,
Extremes of temperature,
Tear and impact damage.
CV96 fits most cars as well as some 4x4’s and light commercial vehicles.
Fits joints measuring:
Shaft: ø18-26mm
Joint: ø56-116mm
Length: 58-128mm
Can be fitted to trilobal/tripod joints, follow the simple step by step instructions found printed in the box or below.
Can be fitted using the conventional cone method.
Alternatively the boot can be stretched using either of our innovative tools, Duragun® or Duralec®, which will enable the job to be fully completed in only 20 minutes, a fraction of the conventional time.
Kit Contains:
CV Boot, Grease Sachet, Small and Large Ear Clamps
The CV96 Universal CV Boot is resistant to:
Oil & grease,
Abrasion,
Grit,
Extremes of temperature,
Tear and impact damage.
CV96 fits most cars as well as some 4x4’s and light commercial vehicles.
Fits joints measuring:
Shaft: ø18-26mm
Joint: ø56-116mm
Length: 58-128mm
Can be fitted to trilobal/tripod joints, follow the simple step by step instructions found printed in the box or below.
Can be fitted using the conventional cone method.
Alternatively the boot can be stretched using either of our innovative tools, Duragun® or Duralec®, which will enable the job to be fully completed in only 20 minutes, a fraction of the conventional time.
Kit Contains:
CV Boot, Grease Sachet, Small and Large Ear Clamps
This CV Boot Kit fits the following vehicles
- Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
- Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14
| Model | Insignia 2.0 CDTi 130 (2008-2014) |
|---|---|
| Description | Universal CV Boot Kit |
| Engine Code | A20DT, A20DTJ, A20DTH |
| BHP | 128, 158 |
| Accessories | CSP50 Cone Spray; CSP150R Cone Spray Refill; GR500 500g CV Grease Tub |
| Installation Tool | Duragun; Fitting Cone (FC1); Ear Clamp Pliers (ECP1) |
| Size mm | Joint: 56-116, Length: 58-128, Shaft: 18-26 |
€13.26
Inc VAT
new
CV Boot Kit (Front Outer)
VKJP01001
In Stock
Article Information
Height: 146 mm
Inner diameter 1: 22 mm
Inner diameter 2: 86 mm
Universal boot kit
Kit includes universal boot, long clamp, short clamp & grease bags.
A choice of diameters between VKJP1001 & VKJP1003 ensures a tight fit every time to avoid grease leakage & water ingress.
To ensure the metal clamps can be safely fastened onto the boot, there are non-skid ridges between each flat rim.
Fits quickly and easily using air-operated expander tools or the specific conical fitting device, without having to remove the CV-joint.
Height: 146 mm
Inner diameter 1: 22 mm
Inner diameter 2: 86 mm
Universal boot kit
Kit includes universal boot, long clamp, short clamp & grease bags.
A choice of diameters between VKJP1001 & VKJP1003 ensures a tight fit every time to avoid grease leakage & water ingress.
To ensure the metal clamps can be safely fastened onto the boot, there are non-skid ridges between each flat rim.
Fits quickly and easily using air-operated expander tools or the specific conical fitting device, without having to remove the CV-joint.
This CV Boot Kit fits the following vehicles
- Insignia 2.0 CDTi 130 (2008-2014) 08/10-12/12
- Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
- Insignia 2.0 CDTi 160 (2008-2014) 08/10-12/14
- Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14
| Model | Insignia 2.0 CDTi 130 (2008-2014) |
|---|---|
| Description | CV Boot Kit |
| Fitment | A20DTH, A20DT, A20DTJ |
| Driven Unit | 128, 158 |
| Tech Note 2 | Clamps, Universal Joint |
| BHP | H: 146, Inner Dia 1: 22, Inner Dia 2: 86 |
€13.75
Inc VAT
new
SKF Universal CV Boot 75mm - 145mm [Large Size] - Light Commercial Vehicles (Inner, Outer)
VKJP01003
In Stock
Article Information
Height: 156 mm
Inner diameter 1: 23 mm
Inner diameter 2: 112 mm
Universal boot kit
Kit includes universal boot, long clamp, short clamp & grease bags.
A choice of diameters between VKJP1001 & VKJP1003 ensures a tight fit every time to avoid grease leakage & water ingress.
To ensure the metal clamps can be safely fastened onto the boot, there are non-skid ridges between each flat rim.
Fits quickly and easily using air-operated expander tools or the specific conical fitting device, without having to remove the CV-joint.
Height: 156 mm
Inner diameter 1: 23 mm
Inner diameter 2: 112 mm
Universal boot kit
Kit includes universal boot, long clamp, short clamp & grease bags.
A choice of diameters between VKJP1001 & VKJP1003 ensures a tight fit every time to avoid grease leakage & water ingress.
To ensure the metal clamps can be safely fastened onto the boot, there are non-skid ridges between each flat rim.
Fits quickly and easily using air-operated expander tools or the specific conical fitting device, without having to remove the CV-joint.
€22.95
Inc VAT
new
Universal CV Boot Kit (Trade Pack - 12x Standard) (Inner, Outer)
CV96UNIPACK12GB
In Stock
The cut to size deisgn on the CV96 enables it to fit most cars which in turn reduces the amount of CV boots that are needed to be stocked. As well as this the design of the boot allows for superior flexibility which minimalises wear and tear especially when the vehicle is on full lock.
The CV96 Universal CV Boot is resistant to:
Oil & grease,
Abrasion,
Grit,
Extremes of temperature,
Tear and impact damage.
CV96 fits most cars as well as some 4x4s and light commercial vehicles.
Fits joints measuring:
Shaft: 18-26mm
Joint: 56-116mm
Length: 58-128mm
Can be fitted to trilobal/tripod joints, follow the simple step by step instructions found printed in the box or below.
Can be fitted using the conventional cone method.
Alternatively the boot can be stretched using either of our innovative tools, Duragun® or Duralec®, which will enable the job to be fully completed in only 20 minutes, a fraction of the conventional time.
Covered by our 2 year ‘No Quibble’ quality guarantee.
Available from all good Distributors and Motor Factors
Kit Contains:
12 CV Boots, 12 Grease sachets, 12 Large and Small Ear Clamps
The CV96 Universal CV Boot is resistant to:
Oil & grease,
Abrasion,
Grit,
Extremes of temperature,
Tear and impact damage.
CV96 fits most cars as well as some 4x4s and light commercial vehicles.
Fits joints measuring:
Shaft: 18-26mm
Joint: 56-116mm
Length: 58-128mm
Can be fitted to trilobal/tripod joints, follow the simple step by step instructions found printed in the box or below.
Can be fitted using the conventional cone method.
Alternatively the boot can be stretched using either of our innovative tools, Duragun® or Duralec®, which will enable the job to be fully completed in only 20 minutes, a fraction of the conventional time.
Covered by our 2 year ‘No Quibble’ quality guarantee.
Available from all good Distributors and Motor Factors
Kit Contains:
12 CV Boots, 12 Grease sachets, 12 Large and Small Ear Clamps
€0.00
Inc VAT
new
Apec Universal CV Boot Kit Standard (ACB8001) CV96 (Inner, Outer)
ACB8001
In Stock
This Apec Universal CV Boot Kit Standard (ACB8001) is supplied in OE matching quality and has been thoroughly tested for accuracy and endurance to maintain the superior quality of Apec products.
Like all car parts, CV boots are subject to general wear and tear, and replacing them with high quality parts will help to ensure longevity.
The apec boot range consists of a variety of premium quality boots such as conventional, stretch fit and split-boot styles to meet all your vehicle requirements. Boots from Apec contain superior stretch qualities compared with boots made from other materials like natural and synthetic rubber.
Apec boots are manufactured to withstand abrasion, grease, grit and extreme temperatures, making them durable for many situations and weather conditions. They are also resistant to oil, which makes them perfect for supporting joints with frequent lubrication.
All products in the Apec drivetrain range undergo several production and post-production tests to ensure OE quality with every purchase. These tests include strength and durability, salt spray testing, boot expansion volume, heat resistance, and cold resistance testing.
This product comes with a 3-year / 36ꯠ-mile warranty for that extra peace of mind.
Apec is a brand you can trust with over 50 years of experience in the automotive aftermarket.
To check vehicle-specific compatibility you can use our Vehicle Lookup.
General Details:
- Length 1/ Length 2 [mm] 58/128
- Joint Diameter, from [mm] 56
- Joint Diameter, up to [mm] 116
- Driveshaft Diameter, from [mm] 18
- Driveshaft Diameter, up to [mm] 26
Benefits:
- OEM matching quality
- Manufactured with precision on advanced production lines
- Durability and strength testing
- Boot expansion volume testing
- Boot heat and cold resistance testing
- 3-year warranty
- Resistant to grease, oil, grit and extreme temperatures
Like all car parts, CV boots are subject to general wear and tear, and replacing them with high quality parts will help to ensure longevity.
The apec boot range consists of a variety of premium quality boots such as conventional, stretch fit and split-boot styles to meet all your vehicle requirements. Boots from Apec contain superior stretch qualities compared with boots made from other materials like natural and synthetic rubber.
Apec boots are manufactured to withstand abrasion, grease, grit and extreme temperatures, making them durable for many situations and weather conditions. They are also resistant to oil, which makes them perfect for supporting joints with frequent lubrication.
All products in the Apec drivetrain range undergo several production and post-production tests to ensure OE quality with every purchase. These tests include strength and durability, salt spray testing, boot expansion volume, heat resistance, and cold resistance testing.
This product comes with a 3-year / 36ꯠ-mile warranty for that extra peace of mind.
Apec is a brand you can trust with over 50 years of experience in the automotive aftermarket.
To check vehicle-specific compatibility you can use our Vehicle Lookup.
General Details:
- Length 1/ Length 2 [mm] 58/128
- Joint Diameter, from [mm] 56
- Joint Diameter, up to [mm] 116
- Driveshaft Diameter, from [mm] 18
- Driveshaft Diameter, up to [mm] 26
Benefits:
- OEM matching quality
- Manufactured with precision on advanced production lines
- Durability and strength testing
- Boot expansion volume testing
- Boot heat and cold resistance testing
- 3-year warranty
- Resistant to grease, oil, grit and extreme temperatures
€0.00
Inc VAT
new
Select Brand
€13.26
€11.39
€13.75
€22.95
€0.00
€0.00
CV Boot Kit (Inner, Outer, Front+Rear)
CVS18
In Stock
Designed to be fitted without the need to dismantle any part of the suspension or driveshaft. The superior flexibility minimalises wear and tear especially when the vehicle is on full lock.
The CVS18 Universal Split Boot is resistant to:
Oil & grease,
Abrasion,
Grit,
Extremes of temperature,
Tear and impact damage.
CVS18 fits most cars as well as some 4x4’s and light commercial vehicles.
Fits CV joints measuring:
Shaft: ø18-34mm
Joint: ø60-116mm
Length: 58-128mm
Can be fitted to trilobal/tripod joints, follow the simple step by step instructions found printed in the box or below.
This boot is aimed more at the DIY mechanic and, as the name suggests, has a tongue and grove ‘split’ running it’s full length.
Once in position the ‘split’ joint is glued using the special rubber adhesive that is included in the kit, making a strong durable join.
Kit Contains:
CV Boot, Grease Sachet, Small and Large Ear Clamps, Glue and Gloves
The CVS18 Universal Split Boot is resistant to:
Oil & grease,
Abrasion,
Grit,
Extremes of temperature,
Tear and impact damage.
CVS18 fits most cars as well as some 4x4’s and light commercial vehicles.
Fits CV joints measuring:
Shaft: ø18-34mm
Joint: ø60-116mm
Length: 58-128mm
Can be fitted to trilobal/tripod joints, follow the simple step by step instructions found printed in the box or below.
This boot is aimed more at the DIY mechanic and, as the name suggests, has a tongue and grove ‘split’ running it’s full length.
Once in position the ‘split’ joint is glued using the special rubber adhesive that is included in the kit, making a strong durable join.
Kit Contains:
CV Boot, Grease Sachet, Small and Large Ear Clamps, Glue and Gloves
This CV Boot Kit fits the following vehicles
- Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
- Insignia 2.0 CDTi 160 (2008-2014) 08/10-12/14
- Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14
| Model | Insignia 2.0 CDTi 130 (2008-2014) |
|---|---|
| Description | Universal CV Boot Kit |
| Engine Code | A20DT, A20DTJ, A20DTH |
| BHP | 128, 158 |
| Accessories | GR500 500g CV Grease Tub |
| Installation Tool | Ear Clamp Pliers (ECP1) |
| Size mm | Joint: 60-116, Length: 58-128, Shaft: 18-34 |
| Fitment Detail | Outer |
€21.86
Inc VAT
new
Select Brand
€21.86
€0.00
CV Boot Kit (Rear)
ADT38107
Out of Stock
This CV Boot Kit fits the following vehicles
- Insignia 2.0 CDTi 160 (2008-2014) 06/10-01/18
| Model | Insignia 2.0 CDTi 160 (2008-2014) |
|---|---|
| Description | CV Boot Kit |
| Engine Code | A20DTH |
| BHP | 158 |
| IMPORT | IMPORT |
| Part Note | Fitting Position:rear axle,transmission-side, Vehicle Equipment:for vehicles without limited slip differential |
| Note 8 | Inner Dia.[mm]:24,Inner Dia.[mm]:80,Length[mm]:120 |
| Note 9 | Add. Info:with grease;Additional Info.Parts:with greasewith clamps;Material:Thermoplast |
€23.32
Inc VAT
new
Select Brand
€23.32
CV Boot Kit (Front Inner Left Hand+Right Hand)
BCB1001
Out of Stock
This CV Boot Kit fits the following vehicles
- Insignia 2.0 CDTi 130 (2008-2014) 08/10-12/12
- Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
- Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14
| Model | Insignia 2.0 CDTi 130 (2008-2014) |
|---|---|
| Fitment | Universal Stretch Boot |
| Size mm | A20DTH, A20DT, A20DTJ |
| Part Note | 128, 158 |
| Note | To Dia.: 112;L.: 105;To L.: 108;Shaft Dia.: 23;To Shaft Dia.: 35;Joint Dia.: 77 |
| Vehicle Detail | With grease lubrication |
| Engine Code | With Clamps |
€11.88
Inc VAT
new
Select Brand
€11.88
CV Boot Kit (Front Inner Left Hand+Right Hand)
BCB6220
Out of Stock
This CV Boot Kit fits the following vehicles
- Insignia 2.0 CDTi 130 (2008-2014) 08/10-12/12
- Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
- Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14
| Model | Insignia 2.0 CDTi 130 (2008-2014) |
|---|---|
| Fitment | Bellow Kit, driveshaft |
| Size mm | A20DTH, A20DT, A20DTJ |
| Part Note | 128, 158 |
| Note | L.: 101;Shaft Dia.: 29.5;Joint Dia.: 96 |
| Vehicle Detail | Thermoplastic;With grease lubrication |
| Engine Code | With Clamps |
€14.44
Inc VAT
new
Select Brand
€14.44
CV Boot Kit (Front Inner Left Hand+Right Hand)
BCB6200
Out of Stock
This CV Boot Kit fits the following vehicles
- Insignia 2.0 CDTi 130 (2008-2014) 08/10-12/12
- Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
| Model | Insignia 2.0 CDTi 130 (2008-2014) |
|---|---|
| Fitment | Bellow Kit, driveshaft |
| Size mm | A20DTH, A20DT, A20DTJ |
| Part Note | 128 |
| Note | L.: 95;Shaft Dia.: 27;Joint Dia.: 92 |
| Vehicle Detail | Thermoplastic;With grease lubrication |
| Engine Code | With Clamps |
€15.92
Inc VAT
new
Select Brand
€15.92
CV Boot Kit (Front Outer Left Hand+Right Hand)
BCB2358
In Stock
This CV Boot Kit fits the following vehicles
- Insignia 2.0 CDTi 130 (2008-2014) 08/10-12/12
- Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
- Insignia 2.0 CDTi 160 (2008-2014) 08/10-12/14
- Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14
| Model | Insignia 2.0 CDTi 130 (2008-2014) |
|---|---|
| Fitment | Boot Kits |
| Size mm | A20DTH, A20DTJ, A20DT |
| Part Note | 128, 158 |
| Note | L.: 125;Shaft Dia.: 27;Joint Dia.: 89 |
| Vehicle Detail | Thermoplastic;With grease lubrication |
| Engine Code | With Clamps |
€15.62
Inc VAT
new
Select Brand
€15.62
CV Boot Kit (Front Outer Left Hand+Right Hand)
BCB2302R
In Stock
This CV Boot Kit fits the following vehicles
- Insignia 2.0 CDTi 130 (2008-2014) 08/10-12/12
- Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
- Insignia 2.0 CDTi 160 (2008-2014) 08/10-12/14
- Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14
| Model | Insignia 2.0 CDTi 130 (2008-2014) |
|---|---|
| Fitment | Boot Kits |
| Size mm | A20DTH, A20DTJ, A20DT |
| Part Note | 128, 158 |
| Note | L.: 125;Shaft Dia.: 25;Joint Dia.: 86 |
| Vehicle Detail | Polychloroprene (Neoprene);With grease lubrication |
| Engine Code | With Clamps |
€13.28
Inc VAT
new
Select Brand
€13.28
€14.42
€15.34
€13.58
€15.74
€18.95
CV Boot Kit (Front Outer Left Hand+Right Hand)
BCB1002
Out of Stock
This CV Boot Kit fits the following vehicles
- Insignia 2.0 CDTi 130 (2008-2014) 08/10-12/12
- Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
- Insignia 2.0 CDTi 160 (2008-2014) 08/10-12/14
- Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14
| Model | Insignia 2.0 CDTi 130 (2008-2014) |
|---|---|
| Fitment | Universal Stretch Boot |
| Size mm | A20DTH, A20DTJ, A20DT |
| Part Note | 128, 158 |
| Note | To Dia.: 102;L.: 105;To L.: 127;Shaft Dia.: 21;To Shaft Dia.: 29;Joint Dia.: 71 |
| Vehicle Detail | With grease lubrication |
| Engine Code | With Clamps |
€11.94
Inc VAT
new
Select Brand
€11.94
CV Boot Kit (Front Outer Left Hand+Right Hand)
BCB5051
Out of Stock
This CV Boot Kit fits the following vehicles
- Insignia 2.0 CDTi 130 (2008-2014) 08/10-12/12
- Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
- Insignia 2.0 CDTi 160 (2008-2014) 08/10-12/14
- Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14
| Model | Insignia 2.0 CDTi 130 (2008-2014) |
|---|---|
| Fitment | Bellow Kit, driveshaft |
| Size mm | A20DTH, A20DTJ, A20DT |
| Part Note | 128, 158 |
| Note | L.: 125 |
| Vehicle Detail | With grease lubrication |
| Engine Code | With Clamps |
€20.90
Inc VAT
new
Select Brand
€20.90
CV Boot Kit (Rear)
772038230
Out of Stock
This CV Boot Kit fits the following vehicles
- Insignia 2.0 CDTi 160 (2008-2014) 08/10-12/14
- Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14
| Model | Insignia 2.0 CDTi 160 (2008-2014) |
|---|
€0.00
Inc VAT
new
Select Brand
€0.00
CV Boot Kit (Front)
49879
Out of Stock
This CV Boot Kit fits the following vehicles
- Insignia 2.0 CDTi 130 (2008-2014) 07/08-01/18
- Insignia 2.0 CDTi 130 (2008-2014) 07/10-01/18
- Insignia 2.0 CDTi 130 (2013-2017) 07/10-01/18
- Insignia 2.0 CDTi 160 (2008-2014) 06/10-01/18
- Insignia 2.0 CDTi 160 (2008-2014) 07/08-01/18
| Model | Insignia 2.0 CDTi 130 (2008-2014) |
|---|---|
| Description | CV Boot Kit |
| Engine Code | A20DTJ, A20DT, A20DTH, A20DT, A20DTH |
| BHP | 128, 158 |
| IMPORT | IMPORT |
| Part Note | GearBox:Manual |
| Note 8 | Inner Dia.[mm]:28,Inner Dia.[mm]:92,Length[mm]:93 |
| Note 9 | Material:Thermoplast |
| Transmission Note | front axle; transmission-side |
€15.46
Inc VAT
new
Select Brand
€15.46
CV Boot Kit (Rear)
31688
Out of Stock
This CV Boot Kit fits the following vehicles
- Insignia 2.0 CDTi 160 (2008-2014) 06/10-01/18
| Model | Insignia 2.0 CDTi 160 (2008-2014) |
|---|---|
| Description | CV Boot Kit |
| Engine Code | A20DTH |
| BHP | 158 |
| IMPORT | IMPORT |
| Part Note | Fitting Position:rear axle,transmission-side, Vehicle Equipment:for vehicles without limited slip differential |
| Note 8 | Inner Dia.[mm]:24,Inner Dia.[mm]:78,Length[mm]:117 |
| Note 9 | Add. Info:with grease;Additional Info.Parts:with greasewith clamps;Material:Thermoplast |
€19.16
Inc VAT
new
Select Brand
€19.16
Drive Shaft (Front Left Hand+Right Hand)
183295
Out of Stock
This Drive Shaft fits the following vehicles
- Insignia 2.0 CDTi 130 (2008-2014) 07/10-01/18
- Insignia 2.0 CDTi 130 (2013-2017) 07/10-01/18
- Insignia 2.0 CDTi 160 (2008-2014) 06/10-01/18
- Insignia 2.0 CDTi 160 (2008-2014) 07/08-01/18
| Model | Insignia 2.0 CDTi 130 (2008-2014) |
|---|---|
| Description | Drive Shaft |
| Engine Code | A20DTH, A20DT, A20DT, A20DTH |
| BHP | 128, 158 |
| IMPORT | IMPORT |
| Part Note | Fitting Position:Front Axle Left, GearBox:6-Speed Manual, Transmission ID:F40, Vehicle Identification Number (VIN) from:E1000001, Fitting Position:Front Axle Left, GearBox:6-Speed Manual, Transmission ID:F40 |
| Note | Fitting Position:Front axle right, GearBox:6-Speed Manual, Transmission ID:F40, Vehicle Identification Number (VIN) from:E1000001, Fitting Position:Front axle right, GearBox:6-Speed Manual, Transmission ID:F40 |
| Note 9 | Add. Info:with cotter pin;Additional Info.Parts:with cotter pinwith nut |
€0.00
Inc VAT
new
Select Brand
€0.00
CV Boot Kit (Front Outer)
13-0351
In Stock
This CV Boot Kit fits the following vehicles
- Insignia 2.0 CDTi 130 (2008-2014) 01/09-12/14
- Insignia 2.0 CDTi 130 (2008-2014) 08/10-12/12
- Insignia 2.0 CDTi 160 (2008-2014) 01/09-12/14
- Insignia 2.0 CDTi 160 (2008-2014) 08/10-12/14
| Model | Insignia 2.0 CDTi 130 (2008-2014) |
|---|---|
| Description | CV Boot Kit |
| Engine Code | A20DT, A20DTJ, A20DTH |
| BHP | 128, 158 |
| Euro Spec | Rubber |
| Teeth Note | L: 140, Inner Dia: 27, Outer Dia: 91 |
| Vehicle Detail | Thread Size: M24x1.5 |
€13.60
Inc VAT
new
Select Brand
€13.60
€15.78
€13.91
CV Boot Kit (Front Outer)
VKJP3147
Out of Stock
This CV Boot Kit fits the following vehicles
- Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
- Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14
| Model | Insignia 2.0 CDTi 130 (2008-2014) |
|---|---|
| Description | CV Boot Kit |
| Fitment | A20DT, A20DTJ, A20DTH |
| Driven Unit | 128, 158 |
| Tech Note 2 | Material: Thermoplastic |
| BHP | H: 110, Inner Dia 1: 26, Inner Dia 2: 87 |
| AF40, M32, F40, F 40, AF40, F 40, F40 | |
| OE System | E1000001--> |
€0.00
Inc VAT
new
Select Brand
€0.00
CV Boot Kit (Front Outer)
VKJP3148
Out of Stock
This CV Boot Kit fits the following vehicles
- Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
| Model | Insignia 2.0 CDTi 130 (2008-2014) |
|---|---|
| Description | CV Boot Kit |
| Fitment | A20DT, A20DTJ |
| Driven Unit | 128 |
| Tech Note 2 | Material: Thermoplastic |
| BHP | H: 120, Inner Dia 1: 25, Inner Dia 2: 83 |
| M32 |
€0.00
Inc VAT
new
Select Brand
€0.00
CV Boot Kit (Front Outer)
VKJP1339
Out of Stock
This CV Boot Kit fits the following vehicles
- Insignia 2.0 CDTi 130 (2008-2014) 08/10-12/12
- Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
- Insignia 2.0 CDTi 160 (2008-2014) 08/10-12/14
- Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14
| Model | Insignia 2.0 CDTi 130 (2008-2014) |
|---|---|
| Description | CV Boot Kit |
| Fitment | A20DTH, A20DT, A20DTJ |
| Driven Unit | 128, 158 |
| Tech Note 2 | CV Joint, Material: Thermoplastic |
| BHP | H: 125, Inner Dia 1: 27, Inner Dia 2: 90 |
€0.00
Inc VAT
new
Select Brand
€0.00
CV Boot Kit (Front Outer)
VKJP01013
Out of Stock
This CV Boot Kit fits the following vehicles
- Insignia 2.0 CDTi 160 (2008-2014) 08/10-12/14
| Model | Insignia 2.0 CDTi 160 (2008-2014) |
|---|---|
| Description | CV Boot Kit |
| Fitment | A20DTH |
| Driven Unit | 158 |
| Tech Note 2 | Universal Joint, Material: Rubber |
| BHP | H: 97, Inner Dia 1: 22, Inner Dia 2: 72, Inner Dia 1: 22-->29, Inner Dia 2: 72-->84, H: 97, Inner Dia 1: 22, Inner Dia 2: 72, Inner Dia 2: 72-->84, Inner Dia 1: 22-->29 |
€0.00
Inc VAT
new
Select Brand
€0.00
CV Boot Kit (Front Outer)
VKJP01001S
Out of Stock
This CV Boot Kit fits the following vehicles
- Insignia 2.0 CDTi 130 (2008-2014) 08/10-12/12
- Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
- Insignia 2.0 CDTi 160 (2008-2014) 08/10-12/14
- Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14
| Model | Insignia 2.0 CDTi 130 (2008-2014) |
|---|---|
| Description | CV Boot Kit |
| Fitment | A20DTH, A20DT, A20DTJ |
| Driven Unit | 128, 158 |
| Tech Note 2 | Clamps, Universal Joint |
| BHP | H: 146, Inner Dia 1: 22, Inner Dia 2: 86 |
€0.00
Inc VAT
new
Select Brand
€0.00
CV Joint Kit (Front Outer)
VKJA5921
Out of Stock
This CV Joint Kit fits the following vehicles
- Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
| Model | Insignia 2.0 CDTi 130 (2008-2014) |
|---|---|
| Description | CV Joint Kit |
| Fitment | A20DT, A20DTJ |
| Driven Unit | 128 |
| Note | Inner Wheel Side: 24, Outer Wheel Side: 30 |
| Part Size | Pre-greased joint |
| Tech Note 2 | Machined: With groove in inner part (middle) |
| BHP | Outer Dia: 84, Seal Dia: 53 |
| IMPORT | VKJA5941 |
| Thread Size: M24x1.5, M32 |
€0.00
Inc VAT
new
Select Brand
€0.00
CV Joint Kit (Front Outer)
VKJA3120
Out of Stock
This CV Joint Kit fits the following vehicles
- Insignia 2.0 CDTi 130 (2008-2014) 08/10-12/12
- Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
- Insignia 2.0 CDTi 160 (2008-2014) 08/10-12/14
- Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14
| Model | Insignia 2.0 CDTi 130 (2008-2014) |
|---|---|
| Description | CV Joint Kit |
| Fitment | A20DTH, A20DT, A20DTJ |
| Driven Unit | 128, 158 |
| Note | Inner Wheel Side: 26, Outer Wheel Side: 30 |
| Part Size | Pre-greased joint |
| Tech Note 2 | CV Joint, Machined: With groove in inner part (middle) |
| BHP | Outer Dia: 96, Seal Dia: 55 |
| Thread Size: M24x1.5, M32, Thread Size: M24x1.5, AF40, AF40-6, M32, F40, Thread Size: M24x1.5, AF40-6, F40, Thread Size: M24x1.5, AF 40, AF40-6, F40, AF40-6, AF 40, AF40 | |
| OE System | E1000001--> |
€0.00
Inc VAT
new
Select Brand
€0.00
Drive Shaft (Front Left Hand)
VKJC8374
Out of Stock
This Drive Shaft fits the following vehicles
- Insignia 2.0 CDTi 130 (2008-2014) 08/10-12/12
- Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
| Model | Insignia 2.0 CDTi 130 (2008-2014) |
|---|---|
| Description | Drive Shaft |
| Fitment | A20DTH, A20DT, A20DTJ |
| Driven Unit | 128 |
| Note | Outer Diff side: 25, Outer Wheel Side: 30 |
| BHP | L: 624, L2: 58, Seal Dia: 54, Trans-sided Joint Dia: 92, Wheel-side Joint Dia: 91 |
| Thread Size: M24x1.5, M32 | |
| OE System | -->D1061030 |
€0.00
Inc VAT
new
Select Brand
€0.00
Drive Shaft (Front Left Hand, Front Right Hand)
VKJC8377
Out of Stock
This Drive Shaft fits the following vehicles
- Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
- Insignia 2.0 CDTi 160 (2008-2014) 08/10-12/14
- Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14
| Model | Insignia 2.0 CDTi 130 (2008-2014) |
|---|---|
| Description | Drive Shaft |
| Fitment | A20DT, A20DTJ, A20DTH |
| Driven Unit | 128, 158 |
| Note | Outer Diff side: 27, Outer Wheel Side: 30 |
| BHP | L: 614, L2: 79, Seal Dia: 53, Trans-sided Joint Dia: 85, Wheel-side Joint Dia: 91 |
| Thread Size: M24x1.5, AF40-6, AF40, Thread Size: M24x1.5, AF40-6, Thread Size: M24x1.5, AF40-6, AF 40, AF40 | |
| OE System | -->B1999999, C1000001-->, C1000001-->B1999999, -->B1999999, C1000001-->B1999999 |
€0.00
Inc VAT
new
Select Brand
€0.00
Drive Shaft (Front Right Hand, Front Left Hand)
VKJC8373
Out of Stock
This Drive Shaft fits the following vehicles
- Insignia 2.0 CDTi 130 (2008-2014) 03/09-12/14
- Insignia 2.0 CDTi 130 (2008-2014) 08/10-12/12
- Insignia 2.0 CDTi 130 (2008-2014) 11/08-12/14
- Insignia 2.0 CDTi 160 (2008-2014) 08/10-12/14
- Insignia 2.0 CDTi 160 (2008-2014) 11/08-12/14
| Model | Insignia 2.0 CDTi 130 (2008-2014) |
|---|---|
| Description | Drive Shaft |
| Fitment | A20DT, A20DTJ, A20DTH |
| Driven Unit | 128, 158 |
| Note | Outer Diff side: 27, Outer Wheel Side: 30 |
| BHP | L: 618, L2: 79, Seal Dia: 53, Trans-sided Joint Dia: 92, Wheel-side Joint Dia: 91 |
| Thread Size: M24x1.5, Thread Size: M24x1.5, M32, Thread Size: M24x1.5, F40, M32, Thread Size: M24x1.5, F40 | |
| OE System | E1000001-->, -->D1061030, C1000001-->B1999999 |
| Part Size | Mac Pherson suspension |
€0.00
Inc VAT
new
Select Brand
€0.00