Textured Sound Deadening Sheet (1 Sheet Only)
Tetra Pad Textured Sound Deadening Pads are designed to absorb vibrations in sheet metal panels and provide an effective sound insulation. Formulated to give maximum flexibility even in cold conditions, these may be applied to vehicle panels, floors, engine compartments, garage doors etc.
Directions For Use
- Shape the pad by cutiing with a sharp knife or scissors
- Removing the backing paper and apply using multi-directional pressure to avoid air bubbles.
- For best results apply at room temperature between 17C - 25C
If the pad is to be overcoated, carefully remove the plastic film to ensure optimum paint adherence.
Always ensure the surface to be treated is suitably prepared, and fully degreased with Tetrosyl Compliant Panel Wipe. Do not apply temperatures below 5°C.
Sheet Size: 500mm x 500mm x 2mm
Directions For Use
- Shape the pad by cutiing with a sharp knife or scissors
- Removing the backing paper and apply using multi-directional pressure to avoid air bubbles.
- For best results apply at room temperature between 17C - 25C
If the pad is to be overcoated, carefully remove the plastic film to ensure optimum paint adherence.
Always ensure the surface to be treated is suitably prepared, and fully degreased with Tetrosyl Compliant Panel Wipe. Do not apply temperatures below 5°C.
Sheet Size: 500mm x 500mm x 2mm
Product Code: SDP500-1
In Stock
Tetrosyl
Tetrosyl
FAQs
Questions
Please log in to ask a question.
Leave a review
Reviews
Please log in to leave a Review.