Rust-E Rust Remover |5L|
Rust-E from MPEX is a powerful non-toxic rust remover for fast and effective restoration of rusty metal. Our new formula is designed to remove rust quickly and easily, without scrubbing or sanding. Submerge the rusty parts in Rust-E® and walk away, it’s that simple and easy to use.
Rust-E is a water-based, biodegradable product completely free of solvents and harmful chemicals. Using Rust-E® is easy, fast and effective, and you can feel good that it is not environmentally disastrous to use.
Rust-E can be used to remove rust from any metal surface, from toys to car parts, tools to antiques and as it contains no acids or alkalis, not only will it not cause damage to your parts, it won’t damage anything else either.
Take your rusty item, remove any large and loose bits of rust or broken paint with a stiff wire brush, remove any oil or grime and give it a rinse with water. Then submerge parts in Rust-E® and leave for between 1 hour and 24 hours dependent on metal type and severity of rust.
How to use
You can also fill rusty containers or fuel tanks and remove corrosion from inside. A little shake every now and then helps speed the process up. You can also increase the heat up to 40 degrees to make things quicker still. If you have parts that are too large to submerge, you can use paper towels soaked in Rust-E, placed flat over the rusty parts. Try and keep the rust in direct contact with the soaked paper towels for as long as possible and repeat as necessary. Remember not to throw away used Rust-E as it can be re-used many, many times before it stops working. Obviously, it won’t look as clear as the first use, but as long as it keeps working, keep using it! There is no real right or wrong way to use Rust-E, so you can experiment with different methods and share your tips and tricks online.
How it works
Step 1
Take your rusty item, remove any large flakes and dust with a quick wire brush, and ensure there is no grease , oil or dirt…
Step 2
Pour your Rust-E into a container large enough to fully submerge your
rusty item into…
Step 3
Leave your item submerged in Rust-E for anything from 30 minutes to 24 hours, depending on the rust
Step 4
You can check the progress of rust removal and give it a little shake if you feel like it. Rinse part and admire.
Rust-E is a water-based, biodegradable product completely free of solvents and harmful chemicals. Using Rust-E® is easy, fast and effective, and you can feel good that it is not environmentally disastrous to use.
Rust-E can be used to remove rust from any metal surface, from toys to car parts, tools to antiques and as it contains no acids or alkalis, not only will it not cause damage to your parts, it won’t damage anything else either.
Take your rusty item, remove any large and loose bits of rust or broken paint with a stiff wire brush, remove any oil or grime and give it a rinse with water. Then submerge parts in Rust-E® and leave for between 1 hour and 24 hours dependent on metal type and severity of rust.
How to use
You can also fill rusty containers or fuel tanks and remove corrosion from inside. A little shake every now and then helps speed the process up. You can also increase the heat up to 40 degrees to make things quicker still. If you have parts that are too large to submerge, you can use paper towels soaked in Rust-E, placed flat over the rusty parts. Try and keep the rust in direct contact with the soaked paper towels for as long as possible and repeat as necessary. Remember not to throw away used Rust-E as it can be re-used many, many times before it stops working. Obviously, it won’t look as clear as the first use, but as long as it keeps working, keep using it! There is no real right or wrong way to use Rust-E, so you can experiment with different methods and share your tips and tricks online.
How it works
Step 1
Take your rusty item, remove any large flakes and dust with a quick wire brush, and ensure there is no grease , oil or dirt…
Step 2
Pour your Rust-E into a container large enough to fully submerge your
rusty item into…
Step 3
Leave your item submerged in Rust-E for anything from 30 minutes to 24 hours, depending on the rust
Step 4
You can check the progress of rust removal and give it a little shake if you feel like it. Rinse part and admire.
Product Code: RUST-E-5L
In Stock
RUST-E
Rust-E® from MPEX is a powerful non-toxic rust remover for fast and effective restoration of rusty metal. Our new formula is designed to remove rust quickly and easily, without scrubbing or sanding. Submerge the rusty parts in Rust-E® and walk away, it’s that simple and easy to use.
FAQs
Questions
Please log in to ask a question.
Product Files
Safety Data Sheet (PDF)Leave a review
Reviews
Please log in to leave a Review.
Product Alternatives
Granville
GRA0643
Granville Rust Repair 500ml
In Stock
P.O.A
please call for details
PartsforCars
new
Henkel
2792264
Loctite Rust Remedy 100ml 2792264 7505
In Stock
P.O.A
please call for details
PartsforCars
new